Setcrete Latex Floor Levelling Compound 20kg T0603E5A

 Before installing new floor coverings, use SetcreteTM Latex, a floor levelling compound, in interior areas with light to medium traffic. If the subfloors are sound, properly adhered, and prepared, it can be used over a variety of absorbent and non-absorbent subfloor types.

• An easy to use floor levelling compound – just add water in correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes
• Setcrete Latex is self-smoothing and can be applied at thicknesses between 2-10mm
• Drying is dependent upon the absorbency of the sub floor, ambient temperature, and humidity. However, after 2 hours it should be hard enough for you to walk on
• Before applying a floor covering, Setcrete Latex should be left uncovered for 24 hours when applied at 2-5mm thickness. For more than 5mm it should be left for 48 hours
• Setcrete Latex is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete Acrylic Primer diluted in a ratio of 1-part primer to 4 parts water.
• For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete Acrylic Primer to promote adhesion
• The working time for use is approximately 15 - 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time